Low-Platform Bondage Rack (2mm Steel Floor Frame)
A low steel bondage rack for spread-eagle restraint at floor level
If you want a bondage rack that ties a partner out flat in a spread-eagle position rather than standing them upright, this low steel platform is that piece. It is a 2mm steel square, 110 x 110 cm wide and just 40 cm tall, with a corner anchor point at each side for a fixed ground-level cross. Built for committed practitioners and studio operators running floor-level restraint scenes.
2mm steel square platform, corner anchor points
What a low-platform bondage rack is and who it is for
A bondage rack is a rigid structural base with reinforced anchor points that holds a consenting adult in a fixed restraint position. This model is the ground-level version: a 2mm steel square, 110 x 110 cm and 40 cm tall, with a reinforced anchor at each corner for classic spread-eagle restraint. It ties into a wider restraint and frame setup rather than standing a subject upright.
The reason to choose a low platform over an upright rack is the position and the ergonomics. The square holds a partner in a fixed spread-eagle at floor level, and the corner anchors set the four tie-points for it, while the 40 cm height keeps the body just off the floor for handler access instead of resting directly on it. The trade-off is that this is a ground-level piece: it does not offer standing-height tie-points.
It is built for buyers assembling a dedicated play space, couples running spread-eagle ground scenes, and studio operators who want a permanent floor-level restraint base. It is not the right pick for standing restraint, and its ground geometry does not suit anyone with a back condition that makes floor-level positioning uncomfortable.
Key features
- 2mm steel platform: a welded square frame in 2mm-thick steel, engineered for stability under sustained restraint load.
- Square spread-eagle footprint: 110 x 110 cm, sized to tie a partner out in a fixed ground-level cross.
- Corner anchor points: a reinforced anchor at each corner sets the four tie-points for spread-eagle restraint.
- Low 40 cm profile: keeps the subject just off the floor for handler access without direct floor contact.
- Powder-coat finish: the steel surface wipes clean between sessions in private or studio use.
Why a low platform instead of an upright rack
The case for a low platform is the scene it enables. An upright rack holds a subject standing, while this square ties them out flat in a spread-eagle cross, a fundamentally different position that a standing frame cannot reproduce. The four corner anchors do the work, fixing wrists and ankles to the platform edges.
The 40 cm height is a deliberate ergonomic choice. It lifts the body just off the floor so a handler can reach every anchor comfortably and the subject is not lying on a cold surface. Most practitioners add a thin mat, padding, or sheet over the steel base for comfort during extended scenes.
A floor rack anchors the ground level of a room the way a cross anchors a wall. It pairs naturally with upright pieces and hardware so a space can run standing and ground-level scenes in the same layout. See how it fits a broader plan in our dungeon equipment collection.
Ground-level use and real dimensions
- Holds a fixed spread-eagle cross at floor level
- Square span is 110 x 110 cm (43 x 43 in) with a 40 cm platform height
- A reinforced anchor at each corner sets the four tie-points
- Anchors work with separate cuff or rope systems for the restraint itself
- Most practitioners add a mat or padding over the steel for extended scenes
Plan the space before it arrives: the platform occupies a 110 x 110 cm square and stands 40 cm tall (43 x 43 x 16 in), so leave clear room on all four sides for handler access. If you are mapping a room, our dungeon design guide covers layout and anchoring, and the wider bondage racks and frames collection covers the upright pieces that pair with it.
Specifications
Low-platform steel bondage rack: full specifications
| Specification | Detail |
|---|---|
| Product type | Bondage rack (low steel floor platform) |
| Overall dimensions | 110 x 110 x 40 cm (43 x 43 x 16 in) |
| Platform height | 40 cm (16 in), ground-level |
| Footprint | 110 x 110 cm square (43 x 43 in) |
| Material | 2mm-thick steel, powder-coat finish |
| Anchor points | Reinforced anchor at each corner |
| Restraint position | Ground-level spread-eagle |
| Compatible hardware | Separate cuff or rope systems |
| Padding | Steel base; add a mat or padding for comfort |
| Capacity | Engineered for sustained adult dynamic load; review the manufacturer-specified rating before use |
| Finish care | Wipe with a damp cloth and mild cleaner |
| Best for | Spread-eagle ground scenes, permanent floor-level base |
| SKU | N-GZ-008 |
How this floor rack compares to an upright stand-up frame
The difference is the plane the restraint happens in. This low platform ties a partner out flat in a ground-level spread-eagle, while the heavy-duty stand-up bondage frame holds them upright at standing height. Many dedicated rooms run both, one for the ground and one for the wall line.
| Decision factor | This low floor rack | Upright stand-up frame |
|---|---|---|
| Restraint plane | Ground-level, flat spread-eagle | Upright, standing position |
| Form | Low 40 cm square platform | Tall freestanding rack |
| Anchor layout | Four corners for a flat cross | Adjustable points for standing tie-ups |
| Comfort | Add a mat over the steel base | Vertical, no floor contact |
If you want standing restraint, the upright frame is the better fit. This floor rack earns its place when the scene calls for a fixed spread-eagle at ground level that an upright frame cannot hold.
Pairs well with
Frequently Asked Questions About the Low-Platform Bondage Rack
What is a bondage rack?
A bondage rack is a rigid structural base with reinforced anchor points that holds a consenting adult in a fixed restraint position. Also called a bondage frame. This model is a low steel version, a 110 x 110 cm square 40 cm tall, with a corner anchor for ground-level spread-eagle restraint.
What is the low platform best for?
The 110 x 110 cm square with corner anchors suits classic spread-eagle restraint at ground level. The low 40 cm profile keeps the subject just above the floor for ergonomic handler access while preventing direct floor contact during scenes. It is a fixed floor-level base, not a standing rack.
How much weight can this bondage rack hold?
This rack uses 2mm-thick steel and is engineered for sustained adult dynamic load. Always review the manufacturer-specified weight capacity and load rating before each session, and avoid impact loads beyond that rating. Never exceed the rated capacity, and inspect the welds and corner anchors before use.
Do I need to add padding?
The base is bare steel, so most practitioners add a thin mat, padding, or sheet for comfort during extended scenes. The corner anchor points are designed to work with separate cuff or rope systems for the actual restraint. The steel provides the structure; you supply the padding and the restraint hardware.
How is the spread-eagle position set?
Each corner carries a reinforced anchor, so wrists and ankles secure to the four points for a fixed ground-level cross. Use separate cuffs or rope on the anchors, agree on parameters first, and monitor circulation in extended positions. Keep a quick-release plan ready before securing a partner.
What floor space does it need?
The platform is a 110 x 110 cm square, 40 cm tall. Leave clear room on all four sides so a handler can reach every corner anchor during a scene. Place it on a level, solid floor, and treat the square footprint plus surrounding access space as the real footprint when planning a room.
How do I clean and maintain the rack?
Wipe the steel surfaces with a damp cloth and mild cleaner between uses. Inspect the frame welds and corner anchor points periodically and tighten any hardware that loosens. Store away from humidity to preserve the powder-coat finish, and disinfect contact zones with an adult-toy-safe cleaner in studio use.
Planning a floor-level restraint base?
That is what our team is here for. We help buyers confirm floor space and access clearance, match the rack to their cuff and rope hardware, and plan a room that runs standing and ground-level scenes together before they order.
